Natural Stone Sealer’s Choice® Gold – Rapid Cure - Aqua Mix® is a care and maintenance product for natural stone and tile.

Key Features

Polished finish
Coverage: 25m²

Product Information and Directions

Sealer’s Choice® Gold – Rapid Cure is a grade, high performance penetrating / impregnating stone, sealer. It is a low VOC, water-based sealer formulated to provide maximum stain protection, especially in food preparation and serving areas. Ideal for all interior and exterior natural stone, tile & grout surfaces. This sealer also includes built-in Microban® – Cured Sealant is Mould & Mildew Resistant, and this sealer lasts up to 15 years.

Key Features:

Maximum stain protection
May be used as a pre-grouting sealer
Allows moisture vapour transmission
The NEW Rapid Cure Formula protects in less than 4 hours
Now with built-inMicroban® – Cured Sealant is Mould & Mildew Resistant
Safe to use, water-basedlow VOC formula
Does not alter theslip resistance of the sealed surface
Designed to achieve optimal penetration into dense, low-porosity surfaces
Last up to 15 years
VOC Content: Maximum VOCs: <70 grams per litre
Available in: 473ml, 946ml, 3.8L, 18.9L

Approx. Coverage m² per/L

Polished	Honed	Textured
Marble	20-25m²	12-15m²	8-12m²
Limestone	18-22m²	8-12m²	6-10m²
Travertine	20-25m²	12-15m²	8-12m²
Granite	25-30m²	15-20m²	10-14m²
Bluestone / Basalt	20-25m²	12-15m²	8-12m²
Sandstone	14-18m²	10-14m²	6-10m²
Slate	N/A	14-18m²	10-14m²
Concrete	18-22m²	8-12m²	6-10m²
Terrazzo	20-25m²	15-20m²	10-14m²
Terracotta	N/A	N/A	8-12m²
Porcelain	25-35m²	20-30m²	15-20m²

Suitable for use:

As a natural look sealer for all natural stone surfaces (such as sandstone, slate, quartz, marble, limestone, granite, bluestone / basalt) unglazed tiles, polished & unpolished porcelain tiles, clay pavers, polished & unpolished concrete, terrazzo, brick, grout, masonry, encaustic tiles, terracotta and grout. Suitable for both interior and exterior use.

Limitations:

Do not allow sealer to come in contact with any non-recommended surface.
If the product is allowed to dry on the surface, a white film may form. If this occurs, scrub withAqua Mix® NanoScrub® and a white nylon pad.
The sealer will not prevent surface wear oretching from acids or caustic chemicals.

Product Data Sheets:

Technical Data Sheet

Safety Data Sheet

Problem Solving Guide

How to Guide:How to apply a Natural Look Sealer

Ideal for use with any of ourstone wall cladding

Ask us which sealer or cleaner suits your specific stone before you buy. The wrong product on the wrong stone can do more harm than good.

Product Resources

Microban® – Cured Sealant is Mould & Mildew Resistant Technical Data Sheet Safety Data Sheet Problem Solving Guide stone wall cladding

Your cart is empty