Natural Look Penetrating Sealer’s – - Aqua Mix®

Sealer’s Choice® Gold – Rapid Cure is a premium grade, high performance

Limitations

Do not allow product to come in contact with any non-recommended surface
If product is allowed to dry on surface, a white film may form. If this occurs, scrub surface with Aqua Mix® NanoScrub® and a white nylon pad
Sealer will not prevent surface wear or etching from acids or caustic chemicals
Note: Aqua Mix® Ultra-Solv® or Sealer’s Choice® Gold are recommended in place of Penetrating Sealer in food preparation areas or where maximum stain protection is required

Preparation

Surface should be dry, clean and free of waxes, sealers or finishes. New installations need to be dry 24 hours before application. Protect surrounding surfaces. Test product in an inconspicuous area to ensure desirable results.

The Stone, Tile or Grout must be dry prior to applying sealer – the following document explains in detail the definition of the term “dry” as it relates to sealer application. READ MORE

Application of Product

Always test a small area first to ensure satisfactory results.
Apply using a pump sprayer, paint pad applicator, lambswool applicator, sponge or brush.
Allow it to penetrate for up to 5 minutes, if surface is drying within 5 minutes, apply more sealer to keep surface wet for up to 5 minutes.
Wipe surface completely dry using clean, dry cotton, paper or microfiber towels after each application. Ensure no sealer is allowed to dry on the surface.
Porous surfaces may require additional applications.
Conduct a test to see if surface is completely sealed after 2 hours by applying drops of water on the surface. If it penetrates, an additional application is required.

Suitable for use:

As a natural look sealer for all natural stone surfaces (such as sandstone, slate, quartz, marble, limestone, granite, bluestone / basalt) unglazed tiles, polished & unpolished porcelain tiles, clay pavers, polished & unpolished concrete, terrazzo, brick, grout, masonry, encaustic tiles, terracotta and grout. Suitable for both interior and exterior use.

Limitations:

Do not allow sealer to come in contact with any non-recommended surface.
If the product is allowed to dry on the surface, a white film may form. If this occurs, scrub with Aqua Mix® NanoScrub® and a white nylon pad.

The sealer will not prevent surface wear or etching from acids or caustic chemicals.

Approx. Coverage m² per/L

	Polished	Honed	Textured
Marble	20-25m²	12-15m²	8-12m²
Limestone	18-22m²	8-12m²	6-10m²
Travertine	20-25m²	12-15m²	8-12m²
Granite	25-30m²	15-20m²	10-14m²
Bluestone / Basalt	20-25m²	12-15m²	8-12m²
Sandstone	14-18m²	10-14m²	6-10m²
Slate	N/A	14-18m²	10-14m²
Concrete	18-22m²	8-12m²	6-10m²
Terrazzo	20-25m²	15-20m²	10-14m²
Terracotta	N/A	N/A	8-12m²
Porcelain	25-35m²	20-30m²	15-20m²

Product Data Sheets:

Technical Data Sheet

Safety Data Sheet

Problem Solving Guide

How to Guide: How to apply a Natural Look Sealer

Ideal for use with any of our stone wall cladding

Your cart is empty

Total $0.00 AUD

Sealers

Let customers speak for us

Service Areas

Total

$0.00 AUD