Sealer & Coating Remover - Natural Stone Sealer Remover - Aqua Mix®

Name: Sealer & Coating Remover - Natural Stone Sealer Remover - Aqua Mix®
Brand: Aqua Mix
SKU: SR-MTC-0017-002
Price: 61.75 AUD
Availability: InStock

$168.50

Act now, few in stock!

Quantity

Shipping

Delivery: Australia-wide through TNT Express and local carrier services. Calculate your shipping automatically at CHECKOUT before needing to make any payment.

Pickup: We are located in Springwood - Brisbane. Click here to call us to check stock availability and address.

Returns

Stone and Rock's adherence to quality is backed by a 100% money-back guarantee!! within 14 days of purchase.

Stone and Rock reserves the right not to refund or exchange any change of mind item beyond 14 days. This does not affect your statutory consumer rights.

If an item has already been exchanged there can be no further refunds or exchanges.

We do everything we can to make the exchange process fast and simple. Items may be exchanged provided that you contact us within 14 days of receipt and items are in perfect sellable condition.

Stone and Rock will NOT allow or accept an exchange if:

Item has been altered or mishandled

Item has been installed or shows signs of installation (markings, scratches, plumber's putty, etc.)

Sealer & Coating Remover - Natural Stone Sealer Remover - Aqua Mix® is a care and maintenance product for natural stone and tile.

Key Features

Natural finish

Product Information and Directions

Sealer & Coating Remover - Natural Stone Sealer Remover - Aqua Mix®

Sealer & Coating Remover is a non-flammable, multipurpose stripper formulated to stay wet longer which gives the product time to remove most sealers, epoxy grout haze, urethane coatings, synthetic finishes, adhesives and paints. Also dissolves deep-set oil stains and heavy grease build up.

For use on

Natural stone (such as granite, limestone, marble, slate, and travertine), ceramic, porcelain, grout, quarry, Saltillo, terra-cotta, cement pavers and masonry surfaces.

Sealer & Coating Remover Key Features:

Effectively removes sealers, coatings and finishes
Non acidic
Long dwell time ideal for tough projects
Cleans deep-set stains, epoxy grout haze, adhesives and paint

Limitations

Do not allow product to come in contact with any non-recommended surface
Do not spray
Do not use on resinous synthetic agglomerates

Application of Product

USE CHEMICAL-RESISTANT GLOVES, such as nitrile, when handling product. Area should have good air ventilation.

STRIPPING – Read entire label before using. Provide good air ventilation to the room or area of application. Sweep or vacuum surface. Apply a liberal amount of Sealer & Coating Remover to a small, manageable area of up to 25 ft (2 M). Spread with a mop or brush. Allow product to dwell up to 1 hour without drying or until coating or residue softens. Do not allow Sealer & Coating Remover to dry on surface – if remover starts to dry, add more to ensure surface is kept wet. Agitate with a scrub brush or scrub machine. Wipe up residue with clean, absorbent white cotton towels. A wet/dry vacuum may be used. Removal of thick coatings or residue may require several applications – repeat steps 3 through 7 if coating is still on surface. Rinse thoroughly with clean water. Ready for surface traffic in 1 hour or after fumes have dissipated. Allow at least 24-hour drying time before applyingAqua Mix® sealers andfloor finishes.

EPOXY GROUT HAZE REMOVAL – Read entire label before using. Apply Sealer & Coating Remover to a small manageable area of up to 25 ft (2 M). Spread with a mop or brush. Allow product to dwell for up to 1 hour without drying. Lightly agitate surface with a scrub brush until haze is removed. For large commercial installations, a white pad may be used with a scrub machine. Mop up dirty solution. Rinse thoroughly with clean water. Ready for surface traffic in 1 hour depending on ambient temperature conditions. Allow at least 24-hour drying time before applying Aqua Mix® sealers and floor finishes.