High-Gloss Sealer – Natural Stone Sealer - Aqua Mix®

Name: High-Gloss Sealer – Natural Stone Sealer - Aqua Mix®
Brand: Aqua Mix
Price: 75.0 AUD
Availability: InStock

$75.00

$449.00

-83%

Act now, few in stock!

Quantity

Shipping

Delivery: Australia-wide through TNT Express and local carrier services. Calculate your shipping automatically at CHECKOUT before needing to make any payment.

Pickup: We are located in Springwood -Brisbane. Click here to call us to check stock availability and address.

Returns

Stone and Rock's adherence to quality is backed by a 100% money-back guarantee!! within 14 days of purchase.

Stone and Rock reserves the right not to refund or exchange any change of mind item beyond 14 days. This does not affect your statutory consumer rights.

If an item has already been exchanged there can be no further refunds or exchanges.

We do everything we can to make the exchange process fast and simple. Items may be exchanged provided that you contact us within 14 days of receipt and items are in perfect sellable condition.

Stone and Rock will NOT allow or accept an exchange if:

Item has been altered or mishandled

Item has been installed or shows signs of installation (markings, scratches, plumber's putty, etc.)

High-Gloss Sealer – Natural Stone Sealer- Aqua Mix®

For use on

Unsealed, textured natural stone, textured porcelain tiles, clay pavers including Saltillo, terra-cotta and adobe, cement tile, quarry. Internal use only.

High Gloss Sealer is a specially formulated water-based blend of acrylic polymers that provides both a stain resistant surface seal and a durable high-sheen finish, eliminating conventional two-step methods utilising a sealer and finish. High Gloss Sealer allows moisture vapor transmission and is unaffected by ultra-violet light.

Key Features
- May be used as a pre-grouting sealer
- Allows moisture vapor transmission
- Safe to use, low odour, low VOC
- Is unaffected by ultra-violet light
- Last up to 3 years

Limitation

Not for use as a final top surface sealer
Do not allow sealer to come in contact with any non-recommended surface
If product is allowed to dry on surface, a white film may form. If this occurs, scrub with water and a white nylon pad
ProBlock is not a waterproofing agent
Not for use on the top surface prior to the application of Enhancing Sealers such as Aqua Mix® Enrich’N’Seal™ or Aqua Mix® Stone Enhancer

Limitations

Not recommended for use on smooth glazed ceramic or porcelain tile, as surface must be rough-textured to ensure adequate bonding.
Do not allow product to come in contact with any non-recommended surface.
Not recommended for use in or around pools, showers or areas subject to standing water.
Not recommended for use on countertops.
Keep surface clean and dry to reduce possibility of slip-fall accidents.

General Surface Prep

USE CHEMICAL-RESISTANT GLOVES, such as nitrile, when handling product. Surface should be dry, clean and free of waxes, sealers, or finishes. Do not apply directly over silicone sealers, oil or wax based finishes. Aqua Mix® Sealer & Coating Remover will strip the surface and remove wax or old acrylic finishes. Place a few drops of water on various tiles. If water doesn’t penetrate, additional removal is necessary. New installations need to be dry at least 48 hours before application. Clay and Saltillo tile may require extended drying time depending on temperature and humidity. Make sure the tiles are completely dry before application. Test product in an inconspicuous area to ensure desirable results.

Application of Product

Read entire label before using. For new installations sealer can be applied as soon as 48 hours after grouting. Surface must be clean, dry and free of existing sealers and coatings. Apply 2-3 coats of sealer with a clean dense sponge, brush or paint pad applicator in thin, even coats. Allow 30 minutes drying time between coats. Avoid puddling.

The Stone, Tile or Grout must be dry prior to applying sealer – the following document explains in detail the definition of the term “dry” as it relates to sealer application. READ MORE