NanoScrub® - Stone Tile Cleaner - Aqua Mix®
Delivery: Australia-wide through TNT Express and local carrier services. Calculate your shipping automatically at CHECKOUT before needing to make any payment.
Pickup: We are located in Springwood - Brisbane. Click here to call us to check stock availability and address.
Stone and Rock's adherence to quality is backed by a 100% money-back guarantee!! within 14 days of purchase.
Stone and Rock reserves the right not to refund or exchange any change of mind item beyond 14 days. This does not affect your statutory consumer rights.
If an item has already been exchanged there can be no further refunds or exchanges.
We do everything we can to make the exchange process fast and simple. Items may be exchanged provided that you contact us within 14 days of receipt and items are in perfect sellable condition.
Stone and Rock will NOT allow or accept an exchange if:
Item has been altered or mishandled
Item has been installed or shows signs of installation (markings, scratches, plumber's putty, etc.)
NanoScrub® - Stone Tile Cleaner - Aqua Mix® is a care and maintenance product for natural stone and tile.
Key Features
- Polished finish
- Dissolves ground in dirt from textured surfaces
- Removes factory applied waxes and floor finishes
- NanoScrub® is non-acidic and non-flammable
- Breakthrough NanoSTG™ technology
Product Information and Directions
NanoScrub® Tile Cleaner is an abrasive cream cleaner designed to work where other cleaners won’t. It utilizes Nano-sized particles to penetrate into small surface pores where it can effectively work to remove surface stains and residues. An effective Tile Cleaner for all stone and tile surfaces. Also removes factory applied waxes and floor finishes, coating sealers, light grout residue (including epoxy), rubber and pencil marks, light mineral deposits, ground in dirt and most sealer residues. Ideal for cleaning porcelain tiles.
For use on
As a cleaner for porcelain tiles, ceramic, polished and unpolished natural stone (such as granite, limestone, marble, slate, and travertine), grout, quarry, saltillo, terra-cotta, cement pavers, masonry surfaces, and other stone, tile and grout surfaces.
Limitations
Do not allow product to come in contact with any non-recommended surface, including (but not limited to) onyx and soft limestone.
Application of Product
USE CHEMICAL-RESISTANT GLOVES, such as nitrile, when handling product. Read entire label before using. SHAKE WELL BEFORE USING. Sweep, vacuum, or dust surface to remove any loose debris. Pre-wet surface with a liberal amount of water. Apply NanoScrub® directly to the wet surface. Agitate with a white nylon pad, scrub brush or scrub machine. Mop or wet vacuum up residue. Rinse thoroughly with clean water. NanoScrub® can be used as a power booster with any Aqua Mix® cleaner or problem solver, mixed according to directions. Apply chosen product to surface, add NanoScrub® and agitate mixture. Continue to follow directions on the chosen product making sure a clean water rinse is the final step to remove any remaining residue.
Product Data Sheets
Cleaning of equipment
Clean tools with water before material dries.
How to Guides
Removal of Wax on Porcelain Tiles
Removing Grout Haze on Polished Marble or Acid-Sensitive Surfaces
Removal of Sealer Residue from Tile or Stone Surfaces
Removal of Pencil Marks/Metallic Stains
VOC Content
Maximum VOCs: 0.6%
pH
9-10 (alkaline)
Available in
946ml, 3.8L
Ask us which sealer or cleaner suits your specific stone before you buy. The wrong product on the wrong stone can do more harm than good.
Product Resources
Safety Data Sheets Problem Solving Guides Removal of Wax on Porcelain Tiles Removing Grout Haze on Polished Marble or Acid-Sensitive Surfaces