Poultice Stain Remover - Natural Stone Stain Remover - Aqua Mix®

Name: Poultice Stain Remover - Natural Stone Stain Remover - Aqua Mix®
Brand: Aqua Mix
Price: 34.95 AUD
Availability: InStock

$34.95

$55.00

-36%

Act now, few in stock!

Quantity

Shipping

Delivery: Australia-wide through TNT Express and local carrier services. Calculate your shipping automatically at CHECKOUT before needing to make any payment.

Pickup: We are located in Springwood - Brisbane. Click here to call us to check stock availability and address.

Returns

Stone and Rock's adherence to quality is backed by a 100% money-back guarantee!! within 14 days of purchase.

Stone and Rock reserves the right not to refund or exchange any change of mind item beyond 14 days. This does not affect your statutory consumer rights.

If an item has already been exchanged there can be no further refunds or exchanges.

We do everything we can to make the exchange process fast and simple. Items may be exchanged provided that you contact us within 14 days of receipt and items are in perfect sellable condition.

Stone and Rock will NOT allow or accept an exchange if:

Item has been altered or mishandled

Item has been installed or shows signs of installation (markings, scratches, plumber's putty, etc.)

Poultice Stain Remover - Natural Stone Stain Remover - Aqua Mix®

Poultice Stain Remover is a dual purpose, non-acidic stain remover. It is an absorptive clay that is designed to remove deep-set oil and grease stains without scrubbing. It is also a fine abrasive cleaning powder that removes surface stains and grout haze. Very effective on all natural stone and tile surfaces.

For use on

All natural stone (such as granite, limestone, marble, slate, and travertine), porcelain, quarry, Saltillo, terra-cotta, cement pavers, masonry surfaces, and other porous tile and grout surfaces.

Key Features

Effectively removes deep-set oil and grease stains
Safe, non acidic, abrasive cleaning powder
Excellent cleaning additive

Limitations

Do not allow product to come in contact with any non-recommended surface
Light abrasive action or high RPMs on the surface of some marbles may dull the high-polished finish

Application of Product

USE CHEMICAL-RESISTANT GLOVES, such as nitrile, when handling product.

FOR REMOVING DEEP-SET OIL AND GREASE STAINS: Read entire label before using. Mix Poultice Stain Remover powder with water to form a thick, pliable paste. Quantity of Poultice Stain Remover needed will depend on size of stain. Apply a 1/4″ (6 mm) thick layer of paste directly over stain with at least a 1″ (25 mm) overlap beyond edge of stain. Cover with plastic or wax paper. Poke a few very small holes in plastic cover to allow for minimum air exposure. Allow paste to stand on stain for 24 to 48 hours. Remove Poultice Stain Remover with plastic spatula or plastic putty knife and wash off residue with clean water. Repeat procedure if necessary. If area darkens from absorbed moisture, it should dry completely within 5 to 7 days.

FOR REMOVING SURFACE STAINS AND GROUT RESIDUE: Read entire label before using. Protect surrounding areas from splattering to minimize cleanup. Pre-wet a manageable area of the surface with water, approximately 10 ft (1 M) and sprinkle Poultice Stain Remover onto the area mixing into a thin slurry. If surface is vertical, mix slurry in a container and apply to pre-wet surface. Agitate by hand or with low RPM (175-350 RPM) buffer using a white nylon scrub pad. Keep surface wet throughout buffing process. Remove Poultice Stain Remover solution with clean towels or sponge and rinse twice with clean water. A wet/dry vacuum may be used. Rinse with clean water and buff dry with clean towels

NOTE: Poultice Stain Remover is an excellent additive that will boost the cleaning power of many of the Aqua Mix® cleaners such as Phosphoric Acid Substitute, Heavy-Duty Tile & Grout Cleaner, and Stone Deep Clean.